Wrap Barrier

Soundproofing Wrap Barrier; Acoustical Pipe & Duct Lagging Acoustic Material

Duct Wrap & Duct Lagging Wrap Barrier Barrier Products

Soundproofing Wrap duct lagging around noisy pipe and duct work to dramatically reduce the amount of noise transmitting through walls casing of ductwork steel or PVC piping valves sheetmetal enclosures plenums VAV units and fans. Our Soundproofing pipe & duct lagging is easy to cut, trim and install on any site and is ideal for industrial and residential noise alike. Simply wrap this acoustical pipe barrier around any cylinder containing noisy air or liquid flow, and tape the seams shut: you will see 15 to 20 decibel level drop in unwanted noise.Size: 54″ X 30’ 1″ thick.

soundproofing wrap barrier

ANC-WBV

soundproofing wrap barrier

This Soundproofing lagging is loaded vinyl noise barrier featuring a reinforced-foil facing (aluminum faced mylar) which readily accepts a matching tape. It is supplied in 4′ wide rolls, 30′ or 60′ long. Often specificed or used when duct or pipe is already wrapped with standard insulation.

 

soundproofing wrap barrier
ANC-WB21
soundproofing wrap barrier

This Soundproofing lagging is the same product as above with a one-inch thick quilted fiberglass insulation bonded to the back of the barrier. This quilted fiberglass layer acts as a decoupler/sound absorber to improve overall noise reduction performance, as well as to offer thermal insulation (R-value = 5_. This version allows one-stop installation of acoustical/thermal insulation layer and noise barrier.

 

soundproofing wrap barrier
ANC-WB42
soundproofing wrap barrier

This Soundproofing lagging is the same product as above except with a two-inch thick quilted fiberglass decoupler/asorber. This increases noise reduction performance even greater -especially for low frequency noise problems. This version also increases the R-value to 9.

 

soundproofing wrap barrier

Duct Lagging Features

  • STC ratings fo 26-30
  • Easy to cut and install
  • Accepts matching tape
  • Good corrosion resistance
  • Passes FMVSS 302, UL-94
  • High & Low Tempature Applications
  • Quilted fiberglass decoupler available

Installation Instructions:  Use tape or clamps to affix the duct lagging material around the circumference of your duct work or piping. Ask us about a mylar matching tape available to disguise the seams. This is sold in 54″ X 30 ft. roles as an add on product to the duct wrap. Simply wrap standard pipes or vents with this material. Cut to fit and wrap with matching tape. Custom wrap sizing is available upon request.Size: 4’ X 4’ standard. Installation of ANC-WB21 & ANC-WB22

FREQUENCY (Hz)
125
250
500
1K
2K
4K
STC
soundproofing wrap barrier
soundproofing wrap barrier
soundproofing wrap barrier
soundproofing wrap barrier
soundproofing wrap barrier
soundproofing wrap barrier
soundproofing wrap barrier
ANC-WBV 15 18 22 27 32 37 27
ANC-W21 18 18 23 30 39 46 29
ANC-W42 19 20 23 33 44 53 30
PER ASTM:E90
Physical Properties of Components
Product Weight Thickness Service Tempature Tensile Strength Tear Strength Elongation “R” Factor
Barrier
ANC-WBV 1 lb. PSF .090″ Norm -10º to + 180ºF 400 PSI 72 40%
Decoupler/Absorber
ANC-W21 2 lb. PSF 1″ Norm -20º to + 350ºF 4.0
ANC-W42 4 lb. PSF 2″ Norm -20º to + 350ºF 8.0
Acoustical Pipe & Duct Lagging Flammability Properties
Wrap Barrier UL94:Meets V0    FMVSS-302:Pass
ANC-W21
ANC-W42
ASTM E-84
“Surface Burning Characteristics of Building Materials”;
Meets Class A Rating: Flame Spread Index 12.5 :
Smoke Density Index 19.5